Reference Electrodes (Concrete Specific), Điện cực tham chiếu
Xuất sứ: USA
Nhà cung cấp: PITESCO Việt Nam
Hãng sản xuất: M.C.Miller
0914.643.179
ference Electrodes (Concrete Specific)
Features & Benefits
- Copper/Copper Sulfate Reference Electrode can be used in any orientation, including upside down configuration
- Highly durable, large area ceramic plug (2.25 in diameter) - protective plastic cap included
- Ideal for concrete corrosion potential mapping (bridge decks, parking garages, etc.) - stands upright by itself
- Electrode supplied with highly absorbent sponge cap for enhanced electrical contact to concrete surfaces
- Supplied with a charge of copper sulfate crystals inside the Lexan tube
- Diameter of ceramic plug: 2.25 inches (5.72 cm)
- Connector end: Male 1/4-20 Threaded End with Thumb Nut
The Sponge Bottle Electrode (Copper/Copper Sulfate version) offers an ability to efficiently wet local areas on horizontal concrete surfaces just prior to taking rebar potential readings, which significantly improves electrical contact of the electrode to the concrete, thus improving reading accuracy.
The reference electrode itself is a modified RE-7 electrode, which is supplied with a charge of high purity copper sulfate crystals for saturated copper sulfate solution preparation.
Steel reinforced concrete structures, such as parking garages, bridge decks and driveways can be conveniently tested using the Sponge Bottle Electrode.
Connector end: Male 1/4-20 Threaded End with Thumb Nut
Sponge Bottle Electrode - Copper/Copper Sulfate Version
The Sponge Bottle Electrode (Silver/Silver Chloride version) offers an ability to efficiently wet local areas on horizontal concrete surfaces just prior to taking rebar potential readings, which significantly improves electrical contact of the electrode to the concrete, thus improving reading accuracy.
The reference electrode itself is a modified "land-based" silver/silver chloride reference electrode and a 2oz bottle of 3.5 M KCl (3.5 M Potassium Chloride solution) is supplied as a filling solution for electrode preparation.
Steel reinforced concrete structures, such as parking garages, bridge decks and driveways can be conveniently tested using the Sponge Bottle Electrode.
· Connector end: Male 1/4-20 Threaded End with Thumb Nut
Sponge Bottle Electrode - Silver/Silver Chloride Version
Surfactant Solution, 4oz.
4oz Bottle of Surfactant
This Electrical Contact Solution is designed to be mixed with regular tap water to create a wetting solution for a sponge bottle reference electrode that has good wetting properties due to the mixed solution having a lower surface tension than that of regular water which enhances electrical contact of a sponge bottle reference electrode with a concrete surfaces.
Also found in:
· Concrete Mapping System
· Volume: 4.0 ounces (118.3 ml)
